American throat hoop is widely used in machinery such as automobile, petrochemical, pharmaceutical, food brewing sewage treatment and dust purification vehicle parts. It is especially suitable for Senior high school models or corrosive material parts. The throat has anti-torsion, locking, adjustment range and soft and hard pipes over 30mm can be connected. In order to promote the effect of sealing, throat pipe and clamping support end pipe, ordinary pipes should not be directly replaced in actual engineering, and the vertical and axis of the plane itself have certain requirements.

American throat hoop: under the condition that the position information of the clasp is determined, the size of the gap between the two pipe ends should be determined by analyzing and calculating the extension rate of different pipes, the environment during construction and the temperature data. During laying, sharp objects and various oils should be avoided. When laying water belts vertically to high places, hose hoops should be used to hook water belts. When laying water belts by improving traffic and transportation roads, water belts should be padded to protect bridges. When passing through China Railway, in order to remove grease on water belts, warm water or soap can be used to wash them. For frozen water belts, we should first melt them, then, according to the cleaning and drying, the hose that is not fully dried should not be rolled up and stored. When selecting, you need to be a consumer who wants to compare goods with goods, and you also need to know that this type is also different and has different effects. After learning clearly about your own needs, you can select some that can satisfy your own needs, and measure and compare the social multi-party face-to-face ability of quality and quotation methods, after knowing what is different from the theory of advantage that the throat band has, choose the best.

Troubleshooting of American Throat Band

The failure of American throat band mainly occurs in the phenomenon of fastening weakness caused by injury. The British throat is generally unable to fasten, and the fastening force is weak or does not achieve the desired effect. The elimination methods of the British throat are as follows: 1. Due to various reasons, the steel belt needs to be removed for installation, but sometimes we cannot fasten it. The elimination method is that the steel belt and the throat are not on the same level, so that the steel belt and the throat are in a straight line. 2. Troubleshooting of weak links in the fastening process. When tightened, the throat band will not shrink. In this case, the throat band has been damaged, or the throat screw has been damaged. In this case, the throat belt should be replaced with a new one. American throat clamp troubleshooting method: American throat clamp failure is weak when fastening, which is a buckle injury caused by improper operation. The solution is to pad a flat pad on the screw part of the throat clamp, and by staggering the position of the nut, the buckle can be used normally. The phenomenon of buckle injury rarely occurs in American throat band, mainly due to improper operation. Solved by replacing the new throat clamp. Wire throat hoop troubleshooting methods, wire throat hoop failure is also reflected in the screw. After the steel throat clamp turnbuckle is damaged, the fastening will be heavy and the expected effect will not be achieved. To eliminate this problem, remove the screw and clamp it on the vise. The turnbuckle needs to be used upwards to repair it. Rotate to the end with a plate support with a diameter of 6mm. The screw has been repaired and can be used normally on the steel throat hoop.

The above is the introduction of the relevant content of American throat hoop.