Jiapin Industrial Park, 130 Guankou Middle Road, jimei district, Xiamen City
gavin@frandchina.com
Maintenance methods of automation equipment
Release time: 2025-05-15
Automation equipment has a wide range of uses, is very stable during operation, and occupies a small area, and is deeply favored by everyone. The editor will tell you about the daily maintenance methods of automation equipment. If you are interested in this issue, you might as well learn it.
What you need to know when using automation equipment is that equipment lubrication and antifreeze and anti-condensation system maintenance are also important parts of equipment maintenance; daily maintenance of equipment is the basic work of equipment maintenance, which needs to be institutionalized and standardized. Regular maintenance of equipment requires planned preventive inspections.
Of course, in maintenance, you need to have certain inspection tools and instruments in addition to human senses. According to the regular inspection plan, regular inspections are also called regular inspections; the accuracy of automation equipment should also be checked to determine the actual accuracy of the equipment. If the automation equipment makes abnormal sounds during the operation of the machine, it should be reported to the technician in time. Non-designated personnel are not allowed to open the electrical box to avoid the risk of electric shock or damage to electronic components. Another important thing is that the machine operator needs to receive professional training from the manufacturer, and non-designated personnel are not allowed to operate. The manufacturer does not assume any responsibility for machine failure or personal injury caused by improper operation. Of course, do not touch the moving parts during the operation of the equipment to avoid squeezing.
When the automation equipment is in use, you also need to check the rails of the automatic assembly equipment every day and replace them in time when they are damaged or faulty to maintain growth. Of course, what we need to know is that the machine should keep the electrical components clean, remove dust, and maintain a comfortable and healthy working environment. If the machine does not work, the power should be turned off in time, and anti-rust oil should be applied to the main components. The reason is that about 1 month after the installation of the new automatic assembly equipment, the lead screw needs to be cleaned. The warranty period of automation equipment is one year. If the parts are damaged due to non-human factors, the manufacturer will repair or replace the damaged parts free of charge. During maintenance, you can use instruments to detect whether there is water in the equipment due to moisture or other reasons. Equipment with water is prone to rust or other problems. Then you can test the pressure transmitter, temperature transmitter, and observe whether the receiving pipeline of the electric control valve is worn or even falls off. Of course, you need to develop a reasonable maintenance method based on non-standard automation equipment, which greatly improves the level of detection and maintenance. The equipment can then be maintained by wiping, cleaning, lubricating, adjusting and other general methods to maintain and protect the performance and technical status of the equipment, which is called equipment maintenance.
Whatsapp: 0086 18860022858
E-mail:gavin@frandchina.com
Website:www.xmfrand.com
Address: Jiapin Industrial Park, 130 Guankou Middle Road, jimei district, Xiamen
Copyright Xiamen Frand Intelligent Equipment Co., Ltd.©2002 Technical Support:www.300.cn SEO
SAF Coolest v1.2 设置面板 HJOSX-ZSQE-JVASE-ZXV
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page