Jiapin Industrial Park, 130 Guankou Middle Road, jimei district, Xiamen City

gavin@frandchina.com

Xiamen Fulangde Intelligent Equipment Co., Ltd.

News

Home

Company News

Industry dynamics

What is the production process of hose clamp production equipment?

Release time: 2025-06-09

The stainless steel hose clamps produced by throat hoop production equipment are often used as clamps to connect soft steel pipes, but traditional stainless steel hose clamps will appear square when used to connect hard steel pipes with smaller diameters, resulting in liquid or gas leakage problems. However, the new stainless steel hoop products are designed as open outer wheel structures and tightened with bolts, so hard steel pipes with smaller diameters will not have square problems. At the same time, this new type of stainless steel hoop greatly saves costs during production, using only 30% of the production cost of traditional products. The large reduction in costs also means a reduction in selling prices, so stainless steel hoop is also loved by many companies. Accessories used in many industries such as automobiles, petroleum, pharmaceuticals, and sewage treatment all use this new type of stainless steel hoop.

What is the production process of throat hoop production equipment?

hose clamp production equipment manufacturer: Stainless steel hose clamps are relatively small and have little value, but the role of the hoop is very large. American hoop, also known as fitter. American stainless steel hose clamp: small American hose clamp and large American hoop, hoop width is 12.7 mm and 14.2 mm respectively. Through the through-hole process, the throat band has a wide range of applications, torsion and internal pressure, throat band torsion torque balance, locking, compact, wide adjustment range, suitable for hardware pipe connection fasteners above 30 mm, and beautiful appearance after assembly. Features: The worm has low friction and is suitable for connection of high-end models or anti-corrosion material parts.

Uses of stainless steel hoops produced by hose clamp production equipment:

hose clamp production equipment manufacturer: Stainless steel hoops (hose clamps) are used in automobiles, tractors, forklifts, locomotives, ships, mines, petroleum, chemicals, pharmaceuticals, agriculture and other fields of water, oil, steam, dust, etc., to connect fasteners.

Hose clamp production equipment manufacturer: Stainless steel hoops are easy to find on the Internet, but they are rarely introduced in detail after finding the production procedures. Let me introduce the production procedures of stainless steel hoops to friends below.

First of all, the caliber size and tightening capacity of the steel bar and hoop are directly related to the raw materials used to make the hoop. The diameter is divided into 6 thick, 8 thick, and 12 thick. First, the incoming tiger hoop raw materials should be cut into the length of the desired caliber size.

That is to say, rub with the scrubbing mechanical equipment, hold the reinforcing rod when scrubbing, and after putting the scrubber in the equipment, it will work automatically immediately, and the rubbing bat will work. The operation is very simple. The micro-circle motor produced by the throat clamp production equipment provides power, put the steel bar on the equipment, pull the lever, and the steel bar combined with the powerful throat table begins to rotate to a certain extent, and the powerful throat table double circle that stops working is completed. The future production process is galvanizing. The throat clamp also needs to be galvanized after stamping. After the galvanizing is completed, the workers assemble, tighten the nuts, and check whether it is smooth.